2016 Toro Dingo Walk Behind Skid Steer WITH TRAILER

Description

LOW SHIPPING TO CERTAIN LOCATIONS IN AL & SC, FIGURE $ 1.50* PER MILE IN OTHER LOCATIONS
,
* $ 1.50 per mile est. for others thru uship
Overview
Toro Dingo® compact utility loaders possess the versatility to handle countless jobs on every site: dig, haul, plant and build. The TX 427 Narrow track design provides a low 5.1 psi ground pressure which is easy on turf. Designed with workers in mind, all of its power is harnessed in only 3 easy to use
controls, which make it simple for any worker to step up and be productive immediately!
Simple Controls
You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
Exclusive TX Track Drive
Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.
4-Pump Hydraulic System
4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Compact Size
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
Air-Cooled Gasoline Engine
A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX.
Reinforced Tracks
Specifications
Cooling System
Air Cooled
Engine
25 HP (18.6 kW) Kohler Command Pro Series CH 740
Flow
11.4 gpm (43.2 lpm)
Ground Clearance
4.6" (11.7 cm)
Ground Speed
0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
Height
46.1" (117.1 cm)
Hinge Pin Height
65.8" (167.1 cm)
Hydraulic System Pressure
3,000 PSI
Length
92" (233.7 cm) w/bucket; 70.7" (180 cm) w/o bucket
Loader Hydraulic System
Joystick control for all funct
Operating Capacity
535 lbs. (243 kg)
Reservoir Capacity
10.5 gallons (40 liters)
Tip Capacity
1,530 lbs. (694 kg)
Track
96.6" x 5.9" (245 cm x 15 cm)
Weight
1,882 lbs (854 kg)
Width
33.7" (85.6 cm)
Last checked, 998 hrs,
Professionally serviced on a regular basis, ready to work
Call Jacob with any questions 813-5O6-O762
Shipping available from Uship, figure about $ 1.50 per mile
Accessories
Compact Utility Loader Attachments
From earth moving, tilling and trenching to leveling, lifting, hauling and demolishing, all Toro Dingo models can be equipped with over 35 attachments to handle and endless amount of tasks.
See them all here:
Aggressive Tread Tracks
Make those difficult job site conditions easier to maneuver with this aggressive track option.
Ride-On Platform
Quickly and easily bolted on to any Toro Dingo TX model (except TX 413), this ride-on platform helps minimize operator fatigue - especially in applications requiring a lot of hauling and covering substantial distances.
Additional information.
Dingo Light Kit
Make night and dark work places, shine.
Track Page Views With
Auctiva's FREE Counter