Auto ROTISSERIE PLANS For all Cars & Trucks Build it Yourself & Save on Shipping

Description

The EASY BALANCE Rotisserie PLANS
BUILD THIS ROTISSERIE YOURSELF WITHOUT PAYING FOR EXPENSIVE SHIPPING ON A PRE-BUILT UNIT
EASY TO BUILD AND EASY TO USE
Plans can be ordered in standard or metric versions.
This design will allow ANY vehicle to be used with this rotisserie.
This 33 page set of plans include:
3/16" (5mm) Steel Construction:
This is the ideal size for strength and compactness, plus it produces a lightweight system for ease of use.
Built-in Hand Crank Balance System:
Balances vehicle perfectly in just a few minutes while the vehicle is mounted on the rotisserie.  Allows on-the-fly balance adjustments as components are removed or installed on the vehicle.  The adjustment mechanism is sealed and protected from dirt for a long life of continuous, smooth operation.
Rock-Solid Disc Brake System:
Strong, positive locking, automotive brake style mechanism.  Securely holds the vehicle in any position with a turn of a bolt.  No pins are needed or jam bolts that can cause metal gouging.
THIS DESIGN WILL NOT SLIP!!
The vehicle can also be
instantly
rotated at any time while still
holding it in its new position
without having to re-adjust the brake.
Extendable Legs For Additional Stability:
With the legs in the full 6 foot extended position, stability is virtually guaranteed when rolling a loaded rotisserie over uneven surfaces.
The legs can be equipped with any size caster, solid or pneumatic.
The rotisserie can also be built without legs or casters and still be totally stable.
Easy Storage and Transportation:
Both rotisserie ends can be connected together for easy transportation in any standard pick up bed.
Hydraulic Jacking System:
Allows vehicle to be raised from a 19" bumper height to almost 4 feet off the ground.  Floor jacks and jack stands are not needed to mount the vehicle.  Just roll the car up to the rotisserie and start jacking.
The construction of this rotisserie only requires basic metal working and welding skills.  There are n
o complicated angles to cut.  The most complicated cuts are a few 45 degree angles and a few circles.  The rest are square cuts.
The plans use a simple 3D pictorial method of construction without complicated engineering symbols and other terminology to learn.
See examples below.
The plans also include a Material List, Parts List, Cut List, Drill Diagram and Assembly Instructions.  Operation instructions show how to properly and safely use the rotisserie.
Also available are METRIC versions of the plans.
When ordering,
please specify which version you would prefer.