CABLE STRIPPER ( Typo)

Description

The tool on sale is the one as you see in pictures and that is what you are going to get.
Most of details about tool are showing in Picture.
Please contact seller if you have any question before place order.
Very Clean and great condition
Some
useful information about tool has taken from net , it may or not useful for user
INTRODUCTION
Cable Stripper/Slitter 606700--1
is
designed to strip insulation from electrical cable
having an outside diameter from 4.57 to 17.4 mm
(for example, battery cable up to size
4/0 AWG).
2. DESCRIPTION
This tool consists of a handle and a blade. The
handle features a toggle used to rotate the blade, a
blade adjustment used to adjust the length of
exposed part of the blade, and “V” clamp used to hold
the cable during stripping. The end of the “V” clamp
has a knife edge to pry open the cable insulation.
3. USING THE TOOL
Practice the following steps on scrap cable lengths
first.
1. Open the “V” clamp, and place the cable under
the “V” clamp. Close the “V” clamp.
2. Adjust the blade. DO NOT
set the blade too deep.
3.
Slowly
rotate the tool
clockwise
several times
while pressing on the “V” clamp.
4. Using the toggle, rotate the blade 90
_
. While
maintaining pressure, rock the tool longitudinally off
of the cable.
5. Using the knife on the edge of the “V” clamp,
separate the cable insulation from the conductors,
and remove the insulation.
6. Inspect the cable for nicked strands. Re--adjust
the blade if necessary.