Forward Lift 2 post Cylinder Seal Kit / rebuild kit 7-10k lbs 992317 991281

Description

CALL CUSTOMER SUPPORT IF YOU NEED CONFIRMATION A SEAL KIT WILL FIT! 1-866-902-6060
This is 1 seal kit for the hydraulic cylinders found in forward 2 post lifts. It meets or exceeds factory specs. It fits lifts with capacity between 7,000 & 10000 pounds. This kit rebuilds
Prince
cylinders that forward used through many years of production.
This Kit Rebuilds 1 Cylinder
-
HOW TO IDENTIFY YOUR CYLINDER IS A PRINCE
- If your lift has a Prince cylinder in it, it will be approximately 72.5" tall and hang from the top of your lift with a chrome shaft coming out of the bottom of the barrel. Look approximately 8"-10” below the very top of the cylinder (top of your lift where the bolt goes through the cylinder to anchor it to the lift) see ID stampings (see stamping example in pics). If it reads "Prince" or "AN" followed by numbers this is the proper seal kit for your lift. Also compare the gland /end cap of your cylinder to the one pictured on the left. The gland on a prince cylinder has 2 holes on the face of it for a spanner wrench. It protrudes about an 1/8” out of the barrel of the cylinder and is flush / even with the barrel’s outside diameter. If you have your cylinder apart already, compare your piston seal with the one pictured to the left. Prince cylinders have distinctive black, middle humped seal on the piston. If you are still unsure if this seal kit will work for you, call our help hotline @ 1-866-902-6060 and we will be glad to determine what seal kit you need.
This kit came in the following model lifts and may fit others as well dp07a , dpo7 , dp09 , dpo9a , dpo9a2 , dpo9s , dpo9s2 dp97 , dp97a, DP97A2 , dp97s , dp97s2 9000a , 9000an , 10000a , 10000a2 , 10000an , dp10 , dp10a , dp10an , dp10a2 , INT9 , ISP9S , I10 , I10111000
-HOW LONG DOES IT TAKE??        This kit usually takes less than an hour to install and can be done with a vice, pipe wrench and a few hand tools.
-
WHAT THIS KIT WONT' FIT!        If you see the letters “AA”, "T" or "TX" followed by #s or your gland is not the same design as the one pictured then your cylinder is not a PRINCE and this seal kit will NOT work with your lift, but we offers those seal kits as well SO BE SURE TO CALL US AT 1-866-902-6060. WE SELL CYLINDER REBUILD KITS FOR MANY DIFFERENT BRAND AUTO LIFTS AND MANY OTHER PARTS AS WELL.
FLORIDA BUYERS WILL BE CHARGED SALES TAX